The Godfather is not equipped with a switch for switching on and off.

Yes, The GodFather can be removed from its case and installed into a Eurorack system as a 60HP module.

The GodFather draws a maximum of 900mA from a +12V rail due to the many LEDs available on the panel. It is possible to reduce power consumption to 350mA by excluding the LED section by removing jumper J2 before installation in the rack.

The Moog semi-modular synthesizers have a 3.5mm jack audio output on their front panel, referred to as VCA. Connecting them to the Godfather is very simple. You will find included cables in the Godfather package. You'll need to connect the outputs of the 4 VCAs from the Moog semi-modular synthesizers to the 4 inputs of the Godfather, all via 3.5mm jack cables. For further details, we have attached a picture demonstrating this process.

You can select which channel to pre-listen in the headphone output by simply pressing the SHIFT key combined with the channel's rotary encoder that you want to pre-listen to. You have the option to listen to channels individually, or you can listen to two, or all four together. Outputs 3 and 4 are two mono channels, but included is a cable with two male mono connectors and one female stereo connector. This way, you can utilize the headphone pre-listening feature